RAIDO Release 20.2
Ticket | Linked | Function | Type | Subject |
MT-483 | EARTH-274 | Task | Restrict identical Ref Group shortcodes |
Description | Release notes |
It is currently possible to insert identical ref act group shortcodes. As these are used by legality we should prevent that. | This has now been restricted. |
Ticket | Linked | Function | Type | Subject |
MT-1654 | Bug | Vac Planner - Problem with awarded vac days off local and utc times |
Description | Release notes |
There is a problem that awarded (by runing Auto Rostering dialog) vacation off days are in local time (00:00 local to 23:59 local). These times should be taken from reference activity configuration instead. Awarded day off should have the same times as if they were added manually from gantt.
| Time mode is now picked from the activity definition. |
Ticket | Linked | Function | Type | Subject |
MT-2862 | Bug | Aircraft-Save, Copy, Cancel buttons don't work in aircraft dialogue when MEL tab is opened |
Description | Release notes |
Save, Copy, Cancel buttons don't work in aircraft dialog when MEL tab is opened. Information entered in this dialogue can be saved when to go to any other tab where these buttons are active. Expected behavior: Should be possible to use save/copy/cancel buttons from MEL tab. | Problem fixed. |
Ticket | Linked | Function | Type | Subject |
MT-3407 | MEXT-1032,EARTH-670,MEXT-698,MEXT-1004,MEXT-1036,EARTH-147,MEXT-780,MEXT-803,MT-458,MT-2579,EARTH-646 | RAIDO Earth | Task | Show roster changes (revisions, transaction codes) in save dialog when saving assigned pairings on pairing gantt |
Description | Release notes |
Edit and save pairing from pairing gantt (assigned). When the user edits an assigned pairing on the pairing gantt and then saves, the save dialog window needs to show the revision information (legs, activities) that will be changed on the crew member and give the user the option to assign transaction codes to any changed roster activites. This ticket only applies to Earth | Implemented |
Ticket | Linked | Function | Type | Subject |
MT-3657 | Bug | In Trade board CA without downrank is able to see the requests from FOs. |
Description | Release notes |
Dependent on Trade settings. CA without downrank should only be able to see requests from CAs. Now CA's without downrank possibility are able to see requests from FOs too in the case 'Allow crew to downrank if down rankable' is checked in Trade settings. | CA without ability to be downranked will not see FO pairings, regardless if 'Allow crew to downrank if down rankable' is checked in the Trade settings |
Ticket | Linked | Function | Type | Subject |
MT-3691 | MT-3992, | RAIDO Cloud (Web) | Bug | Open time down ranked CA does not show assigned rank FO |
Description | Release notes |
If a CA picks up an FO pairing, the assigned rank does not show their rank as FO in the leg. | Problem fixed. |
Ticket | Linked | Function | Type | Subject |
MT-3880 | MT-6212,MT-3922,,,,,,,, | Story | Crew should be able to drop activities from Current roster tab in Open time |
Description | Release notes |
Crew should be able to drop full or part of pairing(s) or activity/activities from Current roster tab 1. Drop a full pairing by selecting it and clicking drop button. When dropping we check that If the request passes those 3 checks the drop is saved and logged in HR log and a feedback message is returned to the user that the request was approved. If the request is not passed then the request is logged in HR log and a feedback message is returned to the user that the request was denied and why. When clicking drop a messagebox should appear with yes/no buttons so that the crew member will have the ability to undo if needed. Currently it says "Are you sure?" but we should add codes of pairing/activities to make it extra clear what they have selected. | Implemented. |
Ticket | Linked | Function | Type | Subject |
MT-4036 | AR-116 | RAIDO Cloud (Web) | Bug | AR - Crew that has no Base after the middle of period isn't included |
Description | Release notes |
A crew that has no active base after the e.g. middle of the period isn't included in the run. | Implemented. |
Ticket | Linked | Function | Type | Subject |
MT-4201 | ,,MT-6117 | RAIDO Earth | Task | Assume Changing passwords |
Description | Release notes |
As a user I would like to have a possibility to change passwords in EARTH the way we do that in Cloud
| Implemented. |
Ticket | Linked | Function | Type | Subject |
MT-4226 | RAIDO Cloud (Web) | Story | Show METAR in station Tooltip in Gantt |
Description | Release notes |
As a user I want to see the Station METAR in the station Tooltip in the Schedule Gantt | If you have access to weather (actuals and forecasts), it will be shown in the station tooltips. |
Ticket | Linked | Function | Type | Subject |
MT-4650 | SP-325 | RAIDO Cloud (Web) | Story | AUA CR report for notes |
Description | Release notes |
As a crew planner I want to be able to pull a report on a specific note type, to be able to find all crew with a specific note on specific days. AUA is requesting day notes and roster notes. It should be possible to add hr properties such as name of hr that has the note. HR filter, crew selector control, note type control need to be there. It should be possible to save the note types in a template. | A new report for retreiving crew notes is available: |
Ticket | Linked | Function | Type | Subject |
MT-5124 | RAIDO Earth | Sub-task | STC missing in Tooltip |
Description | Release notes |
Service Type Code (STC) should be visible in tooltip on Schedule Gantt in Earth as it is in Cloud. | Implemented |
Ticket | Linked | Function | Type | Subject |
MT-5154 | RAIDO Cloud (Web) | Bug | Func - Station search is broken on searching with no result |
Description | Release notes |
This was found during testing Station dialogue in Cloud, when you search for smth but it gives you no result on active stuff and you switch to show inactive, then the dialogue window crashes. | Issue fixed. |
Ticket | Linked | Function | Type | Subject |
MT-5206 | ,SP-4484 | Task | UI for creating conversion when importing flights |
Ticket | Linked | Function | Type | Subject |
MT-5402 | MT-5516 | Task | Premium pairings in Open time |
Description | Release notes |
Setup OpenTimeAndTradeSettings contain a selector for "Premium Legal Exceptions". If those legal exceptions are applied to a roster activity then the crew is payed extra, should match what is setup in payroll. Sometimes the airline will have less captains for example and then they will separate the pairing to only apply to captains. We add them in this setting to be able to flag them to the user so that they should pick them up, and let them know that they will get extra pay for this pairing. If a pairing in Open time Tab in current period has the LE that is setup in the setting, it should be highlighted, with a border around the pairing header, and use the same color as the LE setup. It should also have a description in the bottom of the pairing details, LE name. If a user picks it up - added to crews roster, it should also be displayed like that so that the user know which pairing is worth extra. | Implemented. |
Ticket | Linked | Function | Type | Subject |
MT-5447 | MT-5908 | RAIDO mobile | Task | Roster |
Description | Release notes |
Hotel information from roster block activity comment should be displayed on a separated row under HTL in pairing details. | An info button has been added. When clicked, hotel info will be displayed: This feature requires hotel pairing activities with information in the comment field. |
Ticket | Linked | Function | Type | Subject |
MT-5449 | Task | First come first served - claims implementation |
Description | Release notes |
2 or more people should not be able to pick up a pairing or swap-pickup a pairing at the same time. First one to pick up should claim the pairing and the other should get a message that someone else is picking it up. | Implemented. |
Ticket | Linked | Function | Type | Subject |
MT-5496 | Task | Stuck export jobs on status "Done" but " Error" in Logs. |
Description | Release notes |
We have repeating errors connected with stuck export jobs in status Done. While checking Outgoing messages the messages are missing. When we check sleipner logs we see such errors: | Problem resolved. |
Ticket | Linked | Function | Type | Subject |
MT-5650 | Sleipner | Story | APIS Overflights and Cargo flights |
Description | Release notes |
The APIS logic should send correct BGM field for Overflights and Cargo flights. | The APIS module is now handling Overflights and Cargo flights correctly. Overflights are any flights matching the filter but with different departure and arrival country compared to the selected country in the APIS setting. Cargo flights are any flights matching the Cargo filter in the APIS setting. These flights should also be included in the main Flight Leg filter in the APIS setting. |
Ticket | Linked | Function | Type | Subject |
MT-5660 | ,MT-2837, | RAIDO Cloud (Web) | Bug | Aircraft-Error message when aircraft version is changed |
Description | Release notes |
Error message when aircraft editors are changed | Problem resolved |
Ticket | Linked | Function | Type | Subject |
MT-5737 | Fire | Sub-task | Grayed out parts of the pairing are selectable |
Description | Release notes |
When the pairing is partially closed before calendar day and some of the parts are grayed out, it is still possible to select them. The grayed out parts of the are also selectable in CurrentRoster tab should be not possible to select them - when the whole pairing is closed, there is no such issue | Issue resolved. |
Ticket | Linked | Function | Type | Subject |
MT-5738 | , | Fire | Task | Closed period prior to aggressive pickup period |
Description | Release notes |
Mesa has a requirement to close Pairings that will be in Aggressive pickup period in 4 hours prior to the aggressive pick up window, to allow the schedulers time to combine pairings before the bidding window opens. Will be from 68 hrs to 64 hrs prior to calendar day when aggressive pick up opens. Setting added in period rules, where user can add amount of hours before Aggressive pickup start that is "closed". This means that the pairings that falls within this period is not displayed to the crew members in Open time in Fire. The crewing people can then go in and manipulate merge pairings that has been separated into smaller pairings etc. | Pairings that will be in Aggressive pickup period will not be visible to users between AGP start time and X hours before that (X from setting). |
Ticket | Linked | Function | Type | Subject |
MT-5782 | Task | Add AssignedCrewComplements to RosterSaver during PBS import |
Description | Release notes |
Currently AssignedCrewComplements are created using stored procedure after import. To avoid possible data integration issues, please add AssignedCrewComplements to transaction, together with Roster Activities and SpecilRoles. | Roster Gantt responsivity improved after changes to the save. |
Ticket | Linked | Function | Type | Subject |
MT-5807 | RAIDO Earth | Task | Exception thrown when looking for selected step in Auto Rostering wizard in Earth |
Description | Release notes |
When step is saved in Cloud and not available in Earth, an exception will be thrown and one can't open the Auto Rostering wizard anymore. Step which can be found in Cloud and not in Earth is "SAP Award" | You will no longer be able to see any template in AutoAssign in Earth which contains SAPAward step. |
Ticket | Linked | Function | Type | Subject |
MT-5827 | SP-4724 | RAIDO Cloud (Web) | Bug | Slot-Func- Not Sent slot status wasn't changed after receiving e-mail from cordinator |
Description | Release notes |
Slot status should be changed to Sent after receiving e-mail from cordinator | Issue resolved. |
Ticket | Linked | Function | Type | Subject |
MT-5845 | Task | Update Stimulsoft to 2020.2.1 |
Description | Release notes |
Update the report generator to the latest version | Implemented |
Ticket | Linked | Function | Type | Subject |
MT-5849 | Sub-task | Any changes to assigned pairings on the pairing gantt need to be reflected on the roster gantt |
Description | Release notes |
Currently in 20.1 and 20.2 if you make a change to an assigned pairing with the Roster Activity Edit, those changes are not reflected on the assigned pairing on the roster gantt. If you do those changes with the Pairing Edit then those changes are reflected correctly. | Issue resolved. |
Ticket | Linked | Function | Type | Subject |
MT-5861 | MT-3920,, | Fire | Bug | Datepicker in OpenTime applies to all tabs at the same time |
Description | Release notes |
In OT, there is a datepicker in each tab (CurrentRoster, DailyOT, SAP Roster, SAP OT). However, it happens so that once dates are selected in some tab, it affect all other tabs. Steps to reproduce:
| Datepicker in filter and filter fields are applied on each tab separately. Switching between tabs does not reset filter values |
Ticket | Linked | Function | Type | Subject |
MT-5878 | Bug | Incorrect Special Role validity visible in Gantt |
Description | Release notes |
Special Role validity is incorrectly displayed in Gantt. Instead of showing UTC, Gantt shows data in crew base time. | Now showing role validity in UTC (Gantt) |
Ticket | Linked | Function | Type | Subject |
MT-5879 | Task | Add Offline capabilities to OpenTime page |
Description | Release notes |
We should be able to show Open Time page when crew member is offline. | Open Time Page is now available for offline use. |
Ticket | Linked | Function | Type | Subject |
MT-5910 | ,,,,, | RAIDO Cloud (Web) | Bug | Not possible to roll out or copy Pilot or Cabin pairings |
Description | Release notes |
When trying to copy out pairings with either Pilot or Cabin selected an error message appears. Rolling out Any pairings works correctly. Pairings can be created manually using both Pilot or Cabin however. | Issue resolved. |
Ticket | Linked | Function | Type | Subject |
MT-5933 | CR-16,MT-6152 | RAIDO Cloud (Web) | Task | Remove crew from APIS FCM based on Roster Designator |
Description | Release notes |
There should be a new setting in the APIS dialog where you can select Roster Designators: "Remove by Roster Designators". It should be a multiselect dropbox. The setting should then be used in AvxAPISCommon and remove any matching Roster designators from the Crew On Board list. | It's now possible to ignore crew members from APIS FCM by using a Roster Designator. |
Ticket | Linked | Function | Type | Subject |
MT-5934 | CR-16 | RAIDO Cloud (Web) | Task | Add dropdown with roster designators in Gendec to exclude crew from report with selected roster designators |
Description | Release notes |
There is a need to be able to remove certain passive crew members from Gendec, as some customers only want them to appear on the passenger APIS. Add dropdown "Remove by Roster Designators" with roster designators in Gendec report selector. Use selected roster designators to exclude crew from report. Roster designators is existing on COB object and method exist RemoveByRosterDesignator. Should be part of the report template so that we can automate the report. | Implemented: |
Ticket | Linked | Function | Type | Subject |
MT-5942 | SP-4502 | Bug | Dynamic Document Report: columns ValidFrom, ValidTo don't show up |
Description | Release notes |
Version: 19.8.12 | Issue resolved. |
Ticket | Linked | Function | Type | Subject |
MT-5952 | ,MT-5955 | Sub-task | Access denied screen when accessing OT without eligible special role and OT setting respectively |
Description | Release notes |
Issue: When a user tries to open the new OT but doesn't have the appropriate special role and OT setting respectively the user experience an infinite loading of the OT roster and it looks like the user is actually going to be able to view it when in fact an error has been thrown in the background. Solution: When opening the dialog do a check to see if the user is eligible to view OT based on the special role and if not show a message that says "You are not eligible to view Open Time - Please check your settings" or something of the sorts. | A check for eligibility is done when a user tries to access OT |
Ticket | Linked | Function | Type | Subject |
MT-5955 | MT-5952, | Bug | CurrentRoster tab not loading if no SR in current operiod |
Description | Release notes |
Iin New OpenTime, when crew member does not have Special Role in current period, the CurrentRoster tab is loading forever in OpenTime | If there is no SR for the current period, the CurrentRoster will still be shown but with no options as no rights are configured |
Ticket | Linked | Function | Type | Subject |
MT-5973 | Bug | Missing HR document in Integration Factory |
Description | Release notes |
Integration Factory for creating a new message takes only documents expired within last 30 days. | Integration Factory for creating a new message now considers all valid documents for the last 30 days. |
Ticket | Linked | Function | Type | Subject |
MT-5996 | MT-6216 | Bug | Pairings not displaying in open time |
Description | Release notes |
Combined AT4 / AT7 crew qualification (ATR) no able to see ATR pairings in OT. | ATR(combined quals) are now visible to ATR crew in OT and net reserves behave accordingly |
Ticket | Linked | Function | Type | Subject |
MT-6005 | Fire | Bug | Fire menu swipe is not working |
Description | Release notes |
User is not able to swipe menu blocks or even click on dots below menu items in Fire. | The Menu in Fire has been changed to be responsive and will adapt to show content and work as expected. |
Ticket | Linked | Function | Type | Subject |
MT-6081 | API | Task | Avoid sending recalculation when SetFlightData updates only pax figures |
Description | Release notes |
Currently SetFlighData function sends information to Sleipner to recalculate whole legs if pax figures are updated. As customers does not use any legality rules related to PAX numbers together with API, sending and recalculation shall be avoided. | Issue resolved and Sleipner performance greatly improved. |
Ticket | Linked | Function | Type | Subject |
MT-6122 | RAIDO Earth | Bug | Earth- It is not possible to create new training via Training Wizard |
Description | Release notes |
For the training wizard to work the time mode in for the schedule gantt has to be set to local time. | Problem resolved. |
Ticket | Linked | Function | Type | Subject |
MT-6125 | RAIDO Cloud (Web) | Bug | OwnerPrfxShortCode is not accessible in the Gantt |
Description | Release notes |
OwnerPrfxShortCode when used in advancedvehiclename does no longer work; the prefix is not shown in the acraft panel. It is also not adhered to in aircraft filters. | Problem resolved. |
Ticket | Linked | Function | Type | Subject |
MT-6174 | POE-5,MT-6210, | RAIDO Earth | Task | Multiple Net Reserve grids in Earth |
Description | Release notes |
We have to display multiple Net Reserve Grid (NRG) in Earth dialog. Each grid represents particular Net Reserve Type. Cloud and Fire already have it. | There is now one grid per Net Reserve Type defined in net Reserve Quota displayed. |
Ticket | Linked | Function | Type | Subject |
MT-6212 | , | Fire | Bug | Incorrect quota is mentioned in decline message when drop |
Description | Release notes |
If a request is declined due to lack of reserves, this should be according to the corresponding net reserve quota | Problem resolved. |
Ticket | Linked | Function | Type | Subject |
AR-93 | Task | Add constraint for only assigning duties on blank days |
Description | Release notes |
Constraint should be added which stops duty activities from being assigned on days that are not blank (completely empty). From costumer: # We assume only blank days will be populated with duties (ie roster blocks / days off) if already in there will not be considered as available for duties. | Implemented. |
Ticket | Linked | Function | Type | Subject |
AR-101 | RAIDO Earth | Story | Autorostering dialog - Save template settings |
Description | Release notes |
I should be possible to save the template settings. (like in Pairing Optimizer). | Implemented: |
Ticket | Linked | Function | Type | Subject |
AR-108 | Bug | Pre assigned activities with no ids |
Description | Release notes |
In AutoRosterBasic (LegalityTimeSpaceModule), if there is an assign activity to a crew which does not have an Id (for example a deleted flight), LegalityTimeSpaceModule will throw an exception. This should not happen, instead this activity should be ignored. | Since we can not say in advance how we should handle activities with missing identifiers (can we assign pairings which overlap with them etc.), a warning will instead be presented to the user of which activity is missing identifier, and the program will stop. The user must fix the preassigned data before run can proceed. |
Ticket | Linked | Function | Type | Subject |
AR-112 | RAIDO Earth | Bug | AR Earth - Result not claimed on submit |
Description | Release notes |
On Submit the crew are not claimed. | Resolved |
Ticket | Linked | Function | Type | Subject |
AR-113 | RAIDO Earth | Bug | AR Cloud - Crew not claimed when importing external file |
Description | Release notes |
Crew are not claimed when importting the external file | Implemented |
Ticket | Linked | Function | Type | Subject |
AR-116 | RAIDO Earth | Bug | AR Earth - Crew with no BASE in the end of the period is excluded |
Description | Release notes |
If the crew has no BASE e.g. from the 20th of the month, the crew will be excluded from the run | The crew will be included in the run for the period the BASE is valid. |
Ticket | Linked | Function | Type | Subject |
AR-122 | RAIDO Earth | Story | AR Earth - Constraint Single day day off must be 36 hours |
Description | Release notes |
Name of constraint shall be changed to Two local night. There shall be three parameters controlling this rule, the Start time (2200) and end time (0600) and number per week. In this example the single DO will be 36 hours. | Implemented |
Ticket | Linked | Function | Type | Subject |
AR-124 | RAIDO Earth | Story | AR Earth - Constraint Consequtive days off in last x days |
Description | Release notes |
The constraint need an additional parameter to define how many days the consecutive period is. "x" number of do in a row, "y" period of days. e.g. 3,10 mean one period of 3 consecutive days in 10 days. | Implemented |
Ticket | Linked | Function | Type | Subject |
AR-126 | RAIDO Earth | Story | AR Earth - Constratint Late/Early separation |
Description | Release notes |
There shall be a parameter defining how many late/early you can have in a row. | Implemented |
Ticket | Linked | Function | Type | Subject |
AR-132 | RAIDO Earth | Story | AR Earth - Constraint Number of Ref act Pairings in a period |
Description | Release notes |
It shall be possible to control number of Reference Pairings "x" sb in "y" days. Parameter: Ref Act, min number of act, max number of acts, number of days. | Implemented |
Ticket | Linked | Function | Type | Subject |
AR-133 | RAIDO Earth | Story | AR Earth - Constraint Max one duty per day |
Description | Release notes |
There shall be a constrain that control that only one duty (pairing) is assigned per day. Reason: Some airlines only allow one Pairing per day. | Implemented |
Ticket | Linked | Function | Type | Subject |
AR-140 | Task | Add validation checks for constraints |
Description | Release notes |
Constraints should be flagged as "possible to validate" or "not possible to validate". If possible to validate they shall be checked on each individual crew before run starts. Especially day off constraints are easily set up in such a way that they can not be fulfilled, no matter the configuration of days off in the period at hand. For each crew and each day off constraint that is possible to validate, an auto rostering run should be performed, where only this constraint is used, and no objective function is used. If this returns a feasible solution, all is good. If it returns infeasible, then we report to the user for which crew/constraint combination the infeasibility occured. | If you run Earth autorostering on a scenario where MinXDaysOffInYDays, MinXConsecutiveDaysOffInYDays, or DaysOffIn3Months can not be fulfilled, you now get a warning saying which crew are invalid according to what constraints and the run should terminate. |
Ticket | Linked | Function | Type | Subject |
AUA-9 | Story | Check leavegroup for HR according to which department it is in for each day |
Description | Release notes |
The system evaluates the selected filters as of today's key date. ex: A PS worker is transferred to TS on 01 Sep 19 and would apply for a week in Dec 19. The worker can enter the week but still as PS MA, which leads to the wrong rank displayed, or the quotas are calculated incorrectly. Suggestion: The system should check the entries in the "HR Departments" where the employee is assigned. Goal: So that the quotas or the rankings are calculated and displayed correctly. Agent example: this is a general problem / applies to everyone | Requirement implemented as described. |
Ticket | Linked | Function | Type | Subject |
AUA-10 | AUA-31, | Story | Seasons and Leave groups during the awarding phase |
Description | Release notes |
To award vacations, we have to open the already closed seasons again. Until now we have to hide the icons, then reopen the phase. When we're done, we'll have to open the phase again, show icon, and so on. There is a big possibility of forgetting something or making a mistake. Suggestion: Goal: | Vacation Award run can now be performed when the planning date in the season has passed. |
Ticket | Linked | Function | Type | Subject |
AUA-16 | SP-2129 | Bug | Vacation planner |
Description | Release notes |
there is a problem on requesting days off if the vacation is in between two months | we have refactored the code managing the functionality to improve the execution of the legality. |
Ticket | Linked | Function | Type | Subject |
AUA-21 | SP-1010 | Bug | Roster request |
Description | Release notes |
Requests that carry in to the next period are counted there too | Until now requests had to touch/overlap period from any side. Now start of request needs to be contained within the period |
Ticket | Linked | Function | Type | Subject |
AUA-22 | Bug | Roster swap |
Description | Release notes |
possible to swap duties which are listed as not allowed to be swapped. | Fixed, you can no longer swap activities disallowed in the governing roster filter. |
Ticket | Linked | Function | Type | Subject |
AUA-31 | Story | Vac Planner. |
Description | Release notes |
The crew bid period in FIRE shall be controlled by the Data input start/end fields in the seasons dialog. Today the bid period is controlled by Planning start/end. | Implemented. |
Ticket | Linked | Function | Type | Subject |
CR-16 | , | RAIDO Cloud | CR Development | APIS |
Description | Release notes |
Remove passive crew from Gendec by using a roster designator. | The APIS setup now allows for filtering out passive crew by selecting the appropriate roster designator. |
Ticket | Linked | Function | Type | Subject |
CR-21 | Sleipner | CR Development | New SMS provider |
Description | Release notes |
Integrate with SMS provider Messente. | Support has been added for SMS provider Messente, select "SMS_Messente" under "File Type" in Com channels configuration. |
Ticket | Linked | Function | Type | Subject |
EARTH-483 | MT-14,MT-4955 | Task | Schedule |
Description | Release notes |
Adding multi filght delay to the Gantt for Earth, in a similar way to what is available in Cloud. It should be possible to set individual reasons for each leg. | Multi Delay from Gantt will now work like in Cloud with a possibility to set individual reasons for each leg |
Ticket | Linked | Function | Type | Subject |
EARTH-739 | Cloud (WEB) | Sub-task | Activity Info |
Description | Release notes |
If you insert fuel data in Cloud using the activity info dialog, it won't be shown in the same tab in Earth. | We have fixed loading of existing records for the fuel data tab in the activity info dialogue. |
Ticket | Linked | Function | Type | Subject |
EARTH-743 | Earth | Sub-task | Info dialogue |
Description | Release notes |
Label and layout adjustment is required in the info dialogue to better match how it looks in RAIDO Web. | Fixed labels and layout |
Ticket | Linked | Function | Type | Subject |
MEXT-597 | Earth | Task | Training Concept. |
Description | Release notes |
To make it easier for the user it would be great if the colors of training activities in the training gantt were the same as the colors used for the matching reference activity. | Same color should now be displayed on roster Gantt and Training Gantt |
Ticket | Linked | Function | Type | Subject |
MEXT-642 | Earth | Bug | Dynamic training report |
Description | Release notes |
Dynamic training report showing valid from/to in UTC despite local/base or station selected in report. | This has now been corrected |
Ticket | Linked | Function | Type | Subject |
MEXT-727 | MEXT-726 | Cloud | Bug | Roster Gantt |
Description | Release notes |
The flight number on a cancelled flight should be retained in the tooltip (or "Info) screen until post cancellation activities have been handled. | Deleted flights that have been removed from assigned pairings show up in the revision dialog so crewing can be advised of the removal of the deleted flight(s). |
Ticket | Linked | Function | Type | Subject |
MEXT-811 | Fire | Bug | Mobile Roster |
Description | Release notes |
I went to the trade board and tried to scroll down to cancel a request I had just submitted for a two way trade. I was unable to scroll all the way down. | Issue resolved. |
Ticket | Linked | Function | Type | Subject |
MEXT-1295 | , | Earth | Bug | Pairings. |
Description | Release notes |
Currently if you make a change to an assigned pairing with the Roster Activity Edit, those changes are not reflected on the assigned pairing on the roster gantt. However If you do those changes with the Pairing Edit then those changes are reflected correctly. | Issue corrected. |
Ticket | Linked | Function | Type | Subject |
MEXT-1312 | Earth, Mobile | Bug | SAP Roster |
Description | Release notes |
SAP Roster displaying UTC and not Base time on pairing detail in request | HrLog (SAP) Open Time messages can now be set to UTC or Base time - please configure the new system seup 'HrLogTimeMode' in the HRE group to the appropriate value. |
Ticket | Linked | Function | Type | Subject |
MEXT-1327 | Fire | Bug | Auto Rostering. |
Description | Release notes |
Swap was declined, when it should have done a day for day comparison on part of the swap request. | Corrected, layover > 24h are now correctly calculated. |
Ticket | Linked | Function | Type | Subject |
MEXT-1336 | Earth | Bug | Training Concept. |
Description | Release notes |
Filters need to be created to use in the training Gantt, so that correct sorting of classrooms and events can be done. | Filter has now been added |
Ticket | Linked | Function | Type | Subject |
MEXT-1338 | MEXT-1397,MEXT-1396 | Earth | Task | Training Concept. |
Description | Release notes |
Add Date Range Picker for Quick Access to sort events in the Training Sessions screen. | Implemented. |
Ticket | Linked | Function | Type | Subject |
MEXT-1378 | Earth | Bug | Pairings |
Description | Release notes |
After Part separation: if pairing edit dialog has been used to select the segments is closed without doing anything, segments disappear from view. | Fixes to pairing edit dialog in Earth |
Ticket | Linked | Function | Type | Subject |
MEXT-1379 | Cloud | Bug | Pairings |
Description | Release notes |
FDP does not calculate in "Pairing Info" or "pairing Check" after any change made to pairing | Issue fixed. |
Ticket | Linked | Function | Type | Subject |
MEXT-1393 | MEXT-1394 | Earth | Task | Training Concept. |
Description | Release notes |
when using the "Consolidate" feature in the training gantt, the rooms should come up in alphabetical order. | This has now been corrected |
Ticket | Linked | Function | Type | Subject |
MEXT-1394 | Earth | Task | Training Concept. |
Description | Release notes |
Please add the Move-Up functionality to the Training Gantt, so that you can move like facilities up to the top. | This has now been implemented. |
Ticket | Linked | Function | Type | Subject |
MEXT-1395 | Earth | Task | Training Concept. |
Description | Release notes |
Please add the "Refresh" functionality to the Training Gantt. | Refreshes from Training Wizard to Gantt are sent correctly. |
Ticket | Linked | Function | Type | Subject |
MEXT-1398 | Earth | Task | Training Concept. |
Description | Release notes |
All drop down tabs in Training Concept should be listed in alphabetical order. | This has now been fixed |
Ticket | Linked | Function | Type | Subject |
MEXT-1399 | MEXT-1341 | Earth | Task | Training Concept. |
Description | Release notes |
Can we rename the Simplified Crew Compliment to something that the users could make sense out. | Fixed, the advanced complement is now the default and the only one available. |
Ticket | Linked | Function | Type | Subject |
MEXT-1401 | Earth | Task | Training Concept. |
Description | Release notes |
Training Gantt is not displaying event in the timezone that is selected. | This has now been fixed |
Ticket | Linked | Function | Type | Subject |
MEXT-1403 | Earth | Task | Training Concept. |
Description | Release notes |
No Date is listed on the Tool-Tip in the training Gantt. | This has now been fixed, Dates are now shown in the tool-tip. |
Ticket | Linked | Function | Type | Subject |
MEXT-1407 | Cloud | Bug | Training Concept |
Description | Release notes |
If the user preferences are set to preferredTimeMode=Local, then the checkbox ticked should be default in the Training Concept, Training Sessions. | This has now been corrected |
Ticket | Linked | Function | Type | Subject |
MEXT-1416 | , | Earth | Bug | Training Concept |
Description | Release notes |
Need to be able to change the training facility & crew compliment after crew has been assigned to a training event | training session facility, type and qualification can now be changed even when there is crew assigned. |
Ticket | Linked | Function | Type | Subject |
MEXT-1417 | Earth | Bug | Roster gantt |
Description | Release notes |
When assigning an event to a crew member, the time verbiage needs to be removed from the verification pop up due to confusion. | Start date of activity can still be shown but it will be clearly defined which time zones are applicable. |
Ticket | Linked | Function | Type | Subject |
MEXT-1418 | Earth | Bug | Training Concept |
Description | Release notes |
When adjusting the height in the training gantt a user may misinterpret the training event as covered. | This has now been fixed. |
Ticket | Linked | Function | Type | Subject |
MEXT-1421 | Earth | Bug | HR Consolidation report |
Description | Release notes |
HR Consolidation report in Earth is producing a blank page, the web version remains unaffected. | Issue resolved. |
Ticket | Linked | Function | Type | Subject |
MEXT-1425 | Earth | Bug | Roster gantt |
Description | Release notes |
Refresh Issues in Earth when making any changes to Rosters | The load button is now disabled while loading occurs |
Ticket | Linked | Function | Type | Subject |
MEXT-1440 | MEXT-1378 | Earth | Bug | Pairings |
Description | Release notes |
Whenever editing(building) a pairing such as deleting or modifying a pairing, some segments may be become hidden in the gantt. The workaround is to recalculate the pairing and reload the entire Gantt. | This issue has been fixed. |
Ticket | Linked | Function | Type | Subject |
MEXT-1448 | Cloud | Bug | Assigned Pairing Overview report |
Description | Release notes |
Currently the Special Role (SR) shown on the report is the one that is valid on the day the report is run. The request is for the SR that is valid for the period the report is run. | This has now been fixed |
Ticket | Linked | Function | Type | Subject |
POE-3 | , | Story | Check-In |
Description | Release notes |
In some cases it's normal to report/check in 36 - 12 hours before the flight. | A new setup parameter has been created 'CheckinEnd', that when set to 0 means it is turned off/inactive, any numerical value other than 0 means how many minutes before best checkin time the checkin shall end. |
Ticket | Linked | Function | Type | Subject |
POE-106 | MT-6194 | Bug | Password, special characters |
Description | Release notes |
It is not possible for a user to use special characters when changing their RAIDO password. An admin can use special characters in the USERS page. | The following special characters are now possible to use for RAIDO passwords by users ! " # ¤ % & / |
Ticket | Linked | Function | Type | Subject |
POE-111 | POE-72,POE-73, | Story | DIV/RR/FR dialog |
Description | Release notes |
Add a free text comment (SI Field) in the DIV/FR/RR dialogues to be picked up by own messages when generating a message. | Implemented. By using field DialogueNote in own message the text is shown in the message using data type Company Activity both in Cloud and Earth |
Ticket | Linked | Function | Type | Subject |
POE-112 | Bug | Integration Factory |
Description | Release notes |
When you use any of the ACARSFUEL*** options in Integration factory, it doesn't return any values. | Issue resolved. |
Ticket | Linked | Function | Type | Subject |
RM-62 | RAIDO Earth | Task | Training Gantt. |
Description | Release notes |
Possibility to open stand alone Training Gantt (not connected with Roster) | Standalone training gantt added. Can be opened by pressing AltGR+T or Ctrl+Alt+T |
Ticket | Linked | Function | Type | Subject |
RM-63 | RAIDO Earth | Task | Training Gantt |
Description | Release notes |
It should be possible to create new training session directly from the training Gantt , by right clicking. | Implemented. |
Ticket | Linked | Function | Type | Subject |
SKY-14 | Reports | Sub-task | Dynamic Leg Report |
Description | Release notes |
Add two fields in Dynamic the leg report; one with external crew onboard named ExternalCrewString and one with external crew comment named ExternalCrewComment. This feature is used if RAIDO is a stand-alone Ops-system to import the Crew Onboard Names from a 3rd party Crew System | Implemented. |
Ticket | Linked | Function | Type | Subject |
SMC-133 | SP-4434,MT-4990 | Task | Roster |
Description | Release notes |
A single crew can logon but cannot load the roster, the rest of the users remain unaffected. | The issue has been resolved by using a RosterCache for recurrent SQL requests. |
Ticket | Linked | Function | Type | Subject |
VVC-53 | Legality | Story | Base month |
Description | Release notes |
A pilot has to renew some documents every 6/12/24/36 months and keep a so called base month for it. So we need to add a Base month concept for handling of document rules. | Initial implementation completed. |
Ticket | Linked | Function | Type | Subject |
WAB-28 | Reports | Story | Roster Report and Activity Report |
Description | Release notes |
Add Social Security Number under "grouping" in Dynamic Roster Report and Activity Report | Implemented |
Ticket | Linked | Function | Type | Subject |
WAB-40 | System | Story | Comchannel |
Description | Release notes |
It should be possible to use WinSCP Sessions URLs to create a com channel in RAIDO | Support added. |